Payment & Shipping Terms:
|Power:||220V Or 380V 50/60Hz||Temperature:||Range -40 ~ +150℃|
|Humidity Range:||20%~98%||Controller:||Programmable LCD Touch Screen|
|Material:||SUS304 Stainless Steel||Test Hole:||D50mm|
1000L Temperature and Humidity Environmental Test Chamber Series with White Color
Temperature and humidity alternating chamber, that uses the temperature acceleration technique under the design strength limit (when circulating in the upper and lower extreme temperature, the product produces alternately expansion and shrinkage) to change the external environmental ability. Thermal stress is generated in the product, through accelerated stress to make hidden defects in the product emerge (potential part material defects, process defects),
In order to avoid changing the product in the process of use, the test of environmental stress sometimes leads to failure, resulting in unnecessary losses, it has a significant effect on improving the good rate of the product and reducing the number of repairs.
1. Inner box volume:100L, 150L,225L,416L,1000L optional;
2. Different stress screening temperature rates can be set 1.5℃/min;
3. Can carry out rapid temperature change (stress screening), condensation test, high temperature and high humidity, temperature and humidity cycle and other tests;
4. Complete real-time test curve analysis shows,no real-time limit;
5. Meet the stress screening of electronic equipment products,lead-free process,MIL-STD-2164/MIL-344A-4-16/MIL-2164A-19/NABMAT-9492/GJB-1032-90/GJB/Z34-5.6.6/IPC-9701...etc. test requirements
LAN and USB port, which can realize E management connection and remotely monitor all kinds of test data.
Rising and cooling rate≥1.5 ℃/min
|Model||Temp and Humidity Range||Internal Dimension
(W x H x D) cm
(W x H x D) cm
|Remark: 20%～98%RH is standard humidity range, support custom made 5%～98%RH|
|Support custom made dimension|
|Control Mode||Balanced Temperature and Humidity Control System|
|Operating Temp. & Humid.||+5℃ ~ +35℃; <85%R.H.|
|Temp. range||A=0℃,B=-20℃, C=-40℃, D=-70℃ ~ +100℃(150℃)|
|Humid. range||20% ~98%R.H.
|Temp. & Humid. fluctuation||±0.5deg; ±2.5%R.H.|
|Temp. & Humid. uniformity||≤2.0deg; ≤3%R.H.|
|Temp. & Humid. Deviation||≤1.0deg; ≤2%R.H.|
|Temp. Heating Time||0℃ ~ +100℃ within 30min; -20℃ ~ +150℃ within 45min|
|Temp. Cooling Time||20℃~ -40℃ within 60min; 20℃ ~ -70℃ within 85min|
|Power Supply||AC 2200V, 50/60 HZ, three-phase (specified by user)|
|Exterior Material||Stainless steel with baking paint|
|Interior material||SUS 304# stainless steel|
|Insulation material||Rigid Polyurethane Foam|
|Refrigeration system||Mechanical cascade refrigeration system; fin type radiator|
|Circulation system||Mechanical convection system|
|Humidification Water Supply||
Automatic water regulating, recoverable supply system,
water shortage alarm system
|Water quality||Distilled water only, 20L Water tank capacity|
|Controller||Touch Screen Controller|
|Safety devices||Overheat protector Switch, compressor overload protector switch,
water shortage protector switch, humidifier protector Switch,
Fault alarm system
|Accessories||Viewing window, Chamber Illumination, Cable port ø50mm,
Product shelf slides 2 pieces, universal casters
Touch screen controller
1, Energy-saving and electricity-saving water-saving and intelligent system, 30%~45% less electricity than traditional machines.
Chamber appearance: high-textured look, The surface is treated with an arc-shaped white line and baking paint, use of flat reaction handle, simple operation, safe and reliable.
2, Operating interface:With high sensitivity touch screen mode, direct touch option, convenient, intuitionistic and easy to operate. Real-time automatic storage and graphical representation of humidity PV/SP values, stored curves, group curves, and progress status.
3, Operating system: Adopt energy saving cold and heat single-principal balance(Q1-TEST)independent R&D system and PID+SSR control mode, It can run smoothly for a long time,Precision of temperature and humidity control,fast rising and lowering temperature, Uniform and balanced to save valuable time for users.
4, Observation window : Viewing window and interior light makes viewing workspace freely and observe the test under best conditions.
5, Dehumidification system: French (Taikang) Compressor for Refrigeration and dehumidification system, it can remove lubricating oil from condensation tube between capillaries more effectively, adopts environmental protection refrigerants(R23/R404/R507)energy saving, low energy consumption and stable performance.
6, Water supply: water supply tank is placed in front and bottom of the experimental box, convenient to replenish humidifying bucket water supply, automatically recycle and save water(the volume of water tank is about 20L).
7, Loop setting:50 programs,50 segments per group, the program can be set for all cycles, part of the loop, and the program is continuous,Setup terminates running setup standby operation,make an appointment for boot time, etc.
8, communication interface:Standard interface device with RS-232 and RS-485,can be online control and management with computer (PC), monitor the test process and execute the automatic switch.
9, Arithmetic device:automatic (manual) execution of temperature / humidity synchronous slope calculation control, avoid specimen condensation.
10, Protective device:automatic Monitoring and Protection system of Controller and Emergency Fault Detection and Control Interface, blackout memory device ensures that the stored program maintains memory data in the event of a power outage.
Contact Person: Mr. Andy DAI