Home ProductsMetallographic Preparation Equipment

Easy Operating Metallurgical Mounting Press Machinery With CE Qualified

Certification
Good quality Benchtop Environmental Test Chamber for sales
Good quality Benchtop Environmental Test Chamber for sales
Customer Reviews
Thanks a lot for the professional service of Q1-Test team, we are happy to have the temperature test chamber, and it works well until now.

—— Tonny Cruise

Salt spray test chamber was installed last week according to your guide, it is working well now, thank you. we will recommend it to my friends.

—— Robert Antonio

Our 1000L temperature test chamber QTH-1000C works very well after installed and set by Q1-test service guy. Our staff can operate it fluently. Thanks

—— Juan Smith

I'm Online Chat Now

Easy Operating Metallurgical Mounting Press Machinery With CE Qualified

China Easy Operating Metallurgical Mounting Press Machinery With CE Qualified supplier

Large Image :  Easy Operating Metallurgical Mounting Press Machinery With CE Qualified

Product Details:

Place of Origin: Dongguan/China
Brand Name: Q1-Test
Certification: CE
Model Number: iPress-889

Payment & Shipping Terms:

Minimum Order Quantity: 1 Set
Price: Negotiable
Packaging Details: Plywood Box
Delivery Time: 15 Working Days
Payment Terms: T/T
Supply Ability: 10 Sets per Month
Contact Now
Detailed Product Description
Diameter: Sample Dia. 30mm (Optional 22, 45mm) Heating: Heating Range 100-200℃
Pressure: 0-2Mpa Cooling: Water Cooling
IPress-888: Sample Dia. 22mm IPress-890: Sample Dia. 45mm

 

Easy Operating Metallurgical Mounting Press Machinery With CE Qualified

 

Brief Introduction:

 

iPress-889 was used to inlay the small and irregular specimens, to ensure these specimens were easily holding to cut, grind and polish, then to do metallographic analysis, spectral analysis or hardness testing.

 

The unit was controlled by micro computer, and can realize automatically heating, pressure loading, cooling and unloading the full mounting process. With the advantages of humanization design, easy operation, high efficiency.


Technical Parameters:

Model

iPress-889

Sample Diameter 30mm,(Opt. 22,45mm)
Heating Range 100-200℃
Pressure Range 0-2Mpa
Cooling Range 20-90℃
Holding Time 0-999s
Cooling Mode Water Cooling
Heating Power 650W
Input Voltage 220V/50HZ
Dimension 350 x 400 x 465mm
Net Weight 48kg

 

Easy Operating Metallurgical Mounting Press Machinery With CE Qualified

Mounting of specimens is usually necessary to allow them to be handled easily. It also minimizes the amount of damage likely to be caused to the specimen itself.

 

The mounting material used should not influence the specimen as a result of chemical reaction or mechanical stresses. It should adhere well to the specimen, and if the specimen is to be electropolished later in the preparation then the mounting material should also be electrically conducting.

 

Specimens can be hot mounted (about 150 °C) using a mounting press either in a thermosetting plastic, e.g. phenolic resin, or a thermosoftening plastic e.g. acrylic resin. If hot mounting will alter the structure of the specimen a cold-setting resin can be used, e.g. epoxy, acrylic or polyester resin. Porous materials must be impregnated by resin before mounting or polishing, to prevent grit, polishing media or etchant being trapped in the pores, and to preserve the open structure of the material.

 

Easy Operating Metallurgical Mounting Press Machinery With CE Qualified

 

A mounted specimen usually has a thickness of about half its diameter, to prevent rocking during grinding and polishing. The edges of the mounted specimen should also be rounded to minimize the damage to grinding and polishing discs.

Contact Details
DongGuan Q1-Test Equipment Co., Ltd.

Contact Person: Mr. Andy DAI

Tel: +86-13450058229

Fax: 86-769-2278-4276

Send your inquiry directly to us (0 / 3000)