Payment & Shipping Terms:
|Plate Dimension:||100×100mm||Plate Gap:||80mm|
Paperboard Side Pressure Strength Testing Machine
Intelligent paperboard side pressure strength tester, also known as computer test control compression tester, paperboard compression tester, electronic compression tester, side pressure meter, ring pressure meter.
It is the basic instrument for the paperboard/paper compressive strength performance test (Paper packaging testing equipment), equipped with a variety of fixture accessories can test the raw paper of the ring pressure strength, cardboard flat pressure strength, side pressure, bonding strength and other tests, so that paper production enterprises to control production costs and improve product quality.
Its performance parameters and technical indicators are in compliance with relevant national standards.
1, GB/T 2679.8-1995 "determination of paper and cardboard ring pressure strength."
2, GB/T 6546-1998 "Corrugated cardboard edge pressure strength measurement."
3, GB/T 6548-1998 "Corrugated board adhesive strength determination."
4. GB/T 2679.6-1996 "Determination of flat compressive strength of corrugated base paper".
5. GB/T 22874 "Determination of flat compressive strength of single and single corrugated cardboard"
The following tests can be performed with the corresponding accessories:
1.Equipped with a ring pressure test center disk and a special sampler for ring pressure to perform a cardboard ring pressure strength test (RCT).
2. Equipped with a side pressure (adhesive) sample sampler and an auxiliary guide block to carry out a corrugated board side pressure strength test (ECT).
3, equipped with peel strength test frame, corrugated board adhesion (peel) strength test (PAT).
4. Equipped with a flat pressure sampler for corrugated flat sheet strength test (FCT).
5. After the original paper laboratory, the compressive strength (CCT) and the flat compressive strength (CMT) were obtained.
1, the system automatically calculates the ring pressure strength, side pressure strength, without the user's hands to calculate, reducing the workload and errors.
2, comes with a package stacking test function, you can directly set the power, time, automatic shutdown after the completion of the test.
3. After the test is completed, there is an automatic return function, which automatically determines the crushing force and automatically saves the test data.
4, three kinds of speed can be set, all Chinese LCD display interface, a variety of units to choose from.
|Test Speed||12.5±2.5mm/min (Support Customized)|
|Plate Dimension||100×100mm (Support Customized)|
|Plate Gap||80mm (Support Customized)|
|Power Supply||AC220V±10% 2A 50HZ|
Contact Person: Mr. Andy DAI