Home ProductsMetallographic Preparation Equipment

Touch Screen Single Disc Metallographic Grinding and Polishing Machine Speed Range 50-1000rpm

Certification
Good quality Benchtop Environmental Test Chamber for sales
Good quality Benchtop Environmental Test Chamber for sales
Customer Reviews
Thanks a lot for the professional service of Q1-Test team, we are happy to have the temperature test chamber, and it works well until now.

—— Tonny Cruise

Salt spray test chamber was installed last week according to your guide, it is working well now, thank you. we will recommend it to my friends.

—— Robert Antonio

Our 1000L temperature test chamber QTH-1000C works very well after installed and set by Q1-test service guy. Our staff can operate it fluently. Thanks

—— Juan Smith

I'm Online Chat Now

Touch Screen Single Disc Metallographic Grinding and Polishing Machine Speed Range 50-1000rpm

China Touch Screen Single Disc Metallographic Grinding and Polishing Machine Speed Range 50-1000rpm supplier
Touch Screen Single Disc Metallographic Grinding and Polishing Machine Speed Range 50-1000rpm supplier Touch Screen Single Disc Metallographic Grinding and Polishing Machine Speed Range 50-1000rpm supplier Touch Screen Single Disc Metallographic Grinding and Polishing Machine Speed Range 50-1000rpm supplier Touch Screen Single Disc Metallographic Grinding and Polishing Machine Speed Range 50-1000rpm supplier

Large Image :  Touch Screen Single Disc Metallographic Grinding and Polishing Machine Speed Range 50-1000rpm

Product Details:

Place of Origin: Dongguan/China
Brand Name: Q1-Test
Certification: CE
Model Number: XGrind-310

Payment & Shipping Terms:

Minimum Order Quantity: 1 Set
Price: Negotiable
Packaging Details: Non-fumigation Plywood Case with Pallet
Delivery Time: 10 Working Days
Payment Terms: T/T
Supply Ability: 30 Sets per Month
Contact Now
Detailed Product Description
Control Panel: Touch Screen Diameter: Disc Diameter φ203mm
Speed: Rotate Speed 50-1000rpm Motor: Power Consumption 250W
Application: Pre-grinding, Grinding And Polishing Cooling: Water Cooling

 

Touch Screen Metallographic Grinding And Polishing Machine Single Disc Polishing Machine

 

Brief Introduction:

Single disc XGrind-310 touch screen grinder polisher is suitable for pre-grinding, grinding and polishing metallographic specimens. Since the machine is speed-adjusted by a transducer, it can get 50-1000rpm , which favors the machine with wide applications.

 

The machine is equipped with cooling system which can cool down the specimen during primary grinding so as to prevent overheating and damage the metallographic structure .

 

Featuring easy operation and reliable performance, it is an indispensable device for the factories, research institutions and college labs to prepare metallographic specimen.


Technical Parameters: 

Model XGrind-310
Grinding/polishing disc diameter φ203mm
Rotate speed: 50-1000r/min
Input voltage AC220V 50Hz
Grinding/Polishing disc quantity 1
Motor Power Consumption 250W
Dimension 740mm x450mm x370mm
Net weight 30kg

 

Grinding/Polishing:

Surface layers damaged by cutting must be removed by grinding. Mounted specimens are ground with rotating discs of abrasive paper, for example wet silicon carbide paper. The coarseness of the paper is indicated by a number: the number of grains of silicon carbide per square inch. So, for example, 180 grit paper is coarser than 1200 grit.

 

The grinding procedure involves several stages, using a finer paper (higher number) each time. Each grinding stage removes the scratches from the previous coarser paper.

 

This can be easily achieved by orienting the specimen perpendicular to the previous scratches. Between each grade the specimen is washed thoroughly with soapy water to prevent contamination from coarser grit present on the specimen surface. Typically, the finest grade of paper used is the 1200, and once the only scratches left on the specimen are from this grade.

 

The series of photos below shows the progression of the specimen when ground with progressively finer paper.

Touch Screen Single Disc Metallographic Grinding and Polishing Machine Speed Range 50-1000rpm

 

Polishing discs are covered with soft cloth impregnated with abrasive diamond particles and an oily lubricant or water lubricant.

 

Particles of two different grades are used: a coarser polish - typically with diamond particles 6 microns in diameter which should remove the scratches produced from the finest grinding stage,

 

and a finer polish – typically with diamond particles 1 micron in diameter, to produce a smooth surface.

 

Before using a finer polishing wheel the specimen should be washed thoroughly with warm soapy water followed by alcohol to prevent contamination of the disc. The drying can be made quicker using a hot air drier.

 

Mechanical polishing will always leave a layer of disturbed material on the surface of the specimen. Electropolishing or chemical polishing can be used to remove this, leaving an undisturbed surface.

 

Touch Screen Single Disc Metallographic Grinding and Polishing Machine Speed Range 50-1000rpm

 
Touch Screen Single Disc Metallographic Grinding and Polishing Machine Speed Range 50-1000rpm
 

Contact Details
DongGuan Q1-Test Equipment Co., Ltd.

Contact Person: Mr. Andy DAI

Tel: +86-13450058229

Fax: 86-769-2278-4276

Send your inquiry directly to us (0 / 3000)