Payment & Shipping Terms:
|Temperature:||Range -40℃ ~ +150℃||Dimension:||Internal 27L, 30 X 30 X 30cm|
|Cooling Rate:||20℃ ~ -40℃ Within 60mins||Humidity:||Range 30% ~95%R.H.|
|Circulation System:||Mechanical Convection System||Safety Device:||Overheat Protector Switch|
Programmable Cycling Benchtop Temperature Humidity Climatic Test Chamber in Unique Shape
Available in several sizes, desk type chambers allow you to cost effectively and select exact chamber that best meets your environmental test conditions.
Benchtop Temperature humidity environmental test chamber is simulation under the condition of product in humid climate environment combination (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and humidity and condensation test, etc.), check whether the adaptability and characteristics of the product itself.
It is applicable for quality inspection for all types of electronic products, electric appliance, and products from communication ,instruction , automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries.
Unique shape with high performance material, used to testing aerospace products, electronic instrumentation, materials, electrical and electronic products and various electronic components.
1, Desk type chamber is optimized to save space while offering a wide test area, relatively light weight allows setup almost everywhere.
2, Full variation to select from 3 temperature ranges (0deg, -20deg, -40deg), and standard volumes (27L and 80L) for selection to fulfill customers' applications.
3, Cable port is available on both left and up side to allow wiring for power on testing samples.
4, Fog-free viewing window and interior light makes viewing workspace freely and observe the test under best conditions, optional viewing window is available in left side of chamber.
5, Chamber exterior material is stainless steel with environmentally baking paint resists corrosion and provides impact resistance. Interior material is SUS304# stainless steel with excellent heat resistance and easy to clean.
6, Touch screen controller is designed to save chamber programming and setup time with temperature limit and alarm to protect your product.
7, Safety relay connection is provided to protect your device under test by removing power to it when the chamber is not running.
8, RS-232 communications is for computer connection, programming can be set on computer by software, monitor testing process and automatically execute power on/off functions.
9, Adjustable product shelf slides out for easier product access. Shelf design is non-tipping and supports large product loads.
10, Left side of chamber with diameter 50mm cable port for power-on test.
11, Left side of chamber with diameter 50mm testing hole for power-on test.
12, Optional electronic humidity sensor is used on all test chambers for accuracy and minimal maintenance.
Conform but not limited following standards:
IEC68-2-1 (GB-2423.1-2008) Testing A: Low temperature testing method
IEC68-2-2 (GB-2423.2-2008) Testing B: High temperature testing method
MIL-STD-202F (GJB360.8-87) High temperature life testing
MIL-STD-810D (GBJ150.3) High temperature method
MIL-STD810D (GBJ150.4) Low temperature method
IEC68-2-3 (GB2423.3-93) Testing Ca: Constant moist heat testing method.
IEC68-2-30 (GB2423.4-93) Testing Db: Alternate moist heat testing method.
MIL-STD-810D (GJB150.9-93) Moist heat testing method
Cable Port: Size of cable port is available for 100mm
Water purifier RO: 80 Continuously provide purified water for humidifying heater and wet-bulb
Dehumidifier The rotation regenerating dehumidifier M-120 ensures precise control of low humidity (10deg, 15%RH) for electrostatic reliability tests.
Defrosting Device The chamber automatically detects and melts the frost on the evaporator when operating below 0deg in order to allow continuous operation.
Electronic humidity sensor Precision Humidity Sensor with stainless steel protection tube
|Model||Temp and Humidity Range||Internal Dimension
(W x H x D) cm
(W x H x D) cm
W × H × D
|300 × 300 × 300mm (11.8" ×11.8" ×11.8")|
W × H × D
|813 × 609 × 700mm (32.0" × 24.0" × 27.6")
(Exclude height of motor cover)
|Control Mode||Balanced Temperature and Humidity Control System|
|Operating Temp. & Humid. Range||+5deg ~ +35deg; <85%R.H.|
|Temp. range||A=0deg, B=-20deg, C=-40deg~ +100deg(150deg)|
|Humid. range||30% ~95%R.H. (Optional: 5%~98%R.H.)|
|Temp. & Humid. fluctuation||±0.5deg; ±2.5%R.H.|
|Temp. & Humid. uniformity||<2.0deg; ≤3%R.H.|
|Temp. & Humid. Deviation||<1.0deg; ≤2%R.H.|
|Temp. Heating Time||0deg ~ +100degwithin 30min; -20deg ~ +150degwithin 45min|
|Temp. Cooling Time||20deg ~ -40degwithin 60min; 20deg ~ -70degwithin 85min|
|Power Supply||AC380V, 50/60HZ, Three-phase (Specified by User)|
|Exterior Material||stainless steel with baking paint|
|Interior material||SUS304# Stainless steel|
|Insulation material||Rigid Polyurethane foam|
|Refrigeration system||Mechanical cascade refrigeration system; Fin type radiator|
|Circulation system||Mechanical convection system|
|Humidification Water Supply||Automatic water regulating, recoverable supply system, water
shortage alarm system
|Water quality||Distilled water only, 20L Water tank capacity|
|Controller||Touch Screen Controller|
|Safety devices||Overheat protector Switch, Compressor overload protector Switch, water shortage protector Switch, Humidifier protector, Switch Fault alarm system|
|Accessories||Viewing window, Chamber Illumination, Cable port ø50mm,Product shelf slides 2 pieces, universal casters, screen controller|
|Note||1, The performance values are no specimen inside the test area.
2, At 20deg ambient temperature, relative humidity 65%RH, rated voltage
3, According to IEC60068-3-5:2001 and IEC60068-3-6:2001
4, The above specifications are for reference only.
Contact Person: Mr. Andy DAI