Product Details:
Payment & Shipping Terms:
|
| Cooling Type: | Natural Air Cooling, Support Water Cooling | Heating Rate: | Approx. 15 Min At Room Temperature To 160°C |
|---|---|---|---|
| Heater: | Heating Mould Built-in Cylindrical Type | Temp Range: | Room Temperature To 250°C |
| Platen Size: | 200*200, 250*250, 300*300, 350*350, 400*400, 500*500, 600*600mm | Press Gauges: | Manual Pressure Adjustable, Barometer Adjustment Accuracy 5% |
Foaming rubber and plastic Flat vulcanizing Heating press equipment for pressing and moulding
Brief Introduction:
The iqualitrol flat vulcanizing presses are used as the main equipment for pressing and moulding all kinds of rubber model products and non-model products, and can also be used for pressing all kinds of thermosetting plastics and foaming rubber and plastic products.
Q1-test heating press has independent power mechanism and electrical system, and is controlled centrally by push button. The working pressure and heating temperature can be adjusted within a certain range. The machine is divided into two types: manual and semi-automatic.
Model Selection:
| iCREE-6014A-05 | iCREE-6014A-1 | iCREE-6014A-2 |
| Pressure 500kg/0.5KN | 1000kg/10KN | 2000kg/20KN |
Technical Specifications:
| Pressure gauges | Manual pressure adjustable, barometer adjustment accuracy 5% [pressure = pressure / sample area]. |
| Platen size (mm metric) | 200*200/250*250/300*300/350*350/ 400*400/500*500/*600*600 [mm]. |
| Hot pressed plate material | High temperature resistant imported steel plate, surface carbonized and quenched, special treatment for fast heat conduction, parallel pressure without changing shape, wear-resistant. |
| Press plate hardness | 50 to 60 HRC |
| Flatness of the press plate | ≤0.03mm |
| Flatness and parallelism of the press plate | ≤0.16mm |
| Temperature range | Normal temperature - 250°C [Customizable up to 500°C] [Choose one subject to quotation] |
| Temperature uniformity | 1.5°C [the larger the platen the higher the temperature the worse the temperature uniformity] |
| Temperature controller | Precision module with Omron digital value display. |
| Temperature control method | PID precise control, self-tuning with high precision sensors, temperature control accuracy: ±1.0°C. |
| Timer | LED digital setting display, time range 0.1S to 99min to 9.9hr |
| Heaters | Heating mould built-in cylindrical type [according to the pressure plate area configuration of different power packaging pressure plate temperature uniformity, not the same power] |
| Heating up time | Approx. 15 min at room temperature to 160°C |
| Two hot plates | The hot plate can be set to control the temperature separately |
| Heating method | Electric heating |
| Cooling methods | Natural air cooling |
| Pneumatic systems | Q1 pneumatic control system, air driven piston with high precision cylinder without resistance for smooth lifting and lowering; manual pressurization, pressure-holding and unpressurization. |
| Cylinder stroke | Max 120mm |
| Cylinder speed | 11mm/s |
| Pressure table | 0 to 100kg/sq.cm [actual pressure configuration appropriate range]. |
| Moulding method | Manual rise and fall |
| Safety devices | Safety guards, safety gates. [Optional quotation applies] |
| Number of safety devices | 3 |
| Matching moulding frame [optional | Bespoke |
| Supply voltage | 3∮, AC220V |
| Gas source | 0.5-0.7mpa |
| Caster | None |
Contact Person: Mr. Andy DAI
Tel: +86-13450058229
Fax: 86-769-2278-4276
| Factory Address:No. 88, Jiaolian Yiheng Road, Wanjiang district, DongGuan, China (523046) | |
| Sales office:No. 88, Jiaolian Yiheng Road, Wanjiang district, DongGuan, China (523046) | |
| +86-769-2217-9727 | |
| sales@q1-test.com | |
