-
Model:ASR-LN400
Heating rate:2℃～4℃/min,
Temp Range:-40℃~ambient temperature, high temperature chamber: 150℃, humidity 90%RH
Observation window:three-layer vacuum glass, easy to observe the test product
-
rainfall area:Effective rainfall area 800mm * 1600mm
Rainfall intensity:100mm～280mm/M2/H, adjustable
wind speed:5～18 m/s, allowing raindrops to uniformly hit the test product at an angle of 0～45°
rainfall duration:Rain Test Duration: Continuous rainfall duration ≥4H, adjustable, max 24H
-
application:simulating temperature and climatic indoor and outdoor conditions with global irradiation
Light Wavelength:Full-spectrum light DIN75220 and GJB150.17-86, simulating sunlight 280-3000nm
Air conditioning duct:Heater, evaporator (also dehumidifier), humidifier, overheat protector, water supply and drainage devices
Observation window:1 transparent electric heating film anti-condensation insulated tempered glass window
-
Temp. Uniformity:Less than ±2℃
Low Temperature:Range -55℃ ~ +0℃
High Temp:Recovery RT℃～150℃/5min
Cooling:Rate -10℃ ~ -70℃, within 85min
-
Cooling Method:Water/Air Cooling
Damper Device:Forced Air Damper
Pre-heating Time:40min
Ambient Temperature:5℃～30℃
-
Control Method:PID+SSR
Volume:Internal 225L, 750 ×600× 500mm
Power supply:AC380V/50Hz/3P
Cooling Method:Water/Air Cooling
-
Controller:Touch Screen Controller
Operating Temp:+5℃ ~ +35℃
Humid. Range:20% ~98%R.H.
Temp. fluctuation:±0.5deg
-
Volume:Internal 56L, 40 x 35 x 40cm
Temperature:Range -20℃ ~ +150℃
Heating:Rate RT ~ +200℃, within 35min
Cooling:Rate -10℃ ~ -70℃, within 85min
-
Volume:Internal 80L, 500 ×400× 400mm
Temperature:Range -65℃ ~ +10℃
Heating:Rate RT ~ +200℃, within 35min
Cooling:Rate -10℃ ~ -70℃, within 85min
