Product Details:
Payment & Shipping Terms:
|
Features: | Steady Running,small Noise,convenient Operation | Application: | Colleges And Universities,scientific Research Institution |
---|---|---|---|
Diameter: | Disc Diameter φ203mm | Speed: | Rotation Speed 1400rpm |
Power Supply: | AC220V/50HZ/1Ph | Motor: | 360W |
Highlight: | metallurgical laboratory equipment,metallurgical sample preparation equipment |
XGrind-304 Grinder Polisher Machine With Cabinet
Double Plates CE Approved
Brief Introduction:
In the process of Metallographic sample preparation, polishing is a main procedure. After polishing on the machine,the sample surface is like a mirror. XGrind-304 Metallographic sample polishing machine is a classic polishing equipment with steady running,small noise,convenient operation and maintenance.
XGrind-304 meets the polishing requirement of all kinds of materials.This machine is suitable for factories and mines enterprises,colleges and universities,scientific research institution.
Technical Specifications:
Model | XGrind-304 |
Grinding/polishing disc diameter | φ203mm |
Rotate speed | 1400r/min (900r/min alternative) |
Input voltage | AC220V 50HZ |
Disc quantity | 2 |
Motor | 360W |
Dimension | 570mm x910mm x1100mm |
Net weight | 74kg |
Specimen Polishing:
Polishing discs are covered with soft cloth impregnated with abrasive diamond particles and an oily lubricant or water lubricant.
Particles of two different grades are used: a coarser polish - typically with diamond particles 6 microns in diameter which should remove the scratches produced from the finest grinding stage,
and a finer polish – typically with diamond particles 1 micron in diameter, to produce a smooth surface.
Before using a finer polishing wheel the specimen should be washed thoroughly with warm soapy water followed by alcohol to prevent contamination of the disc. The drying can be made quicker using a hot air drier.
Mechanical polishing will always leave a layer of disturbed material on the surface of the specimen. Electropolishing or chemical polishing can be used to remove this, leaving an undisturbed surface.
Contact Person: Mr. Andy DAI
Tel: +86-13450058229
Fax: 86-769-2278-4276