-
frequency range:optional 10-200Hz, 10-500Hz, 10-1kHz, 10-2kHz, 10-5kHz, 10-10kHz
Storage method:Automatic storage, can store 50 point numbers, each point number can store 50 data and a spectrum list
Display:2.4-inch TFT high-definition color screen, 320 * 240 resolution, adjustable backlight brightness
Measurement modes:dedicated mode and spectrum mode
-
Peak Value:Sampling Frequency 2000HZ
Charging Time:4～6 Hours, Continuous using time About 10 Hours
torque sensor:high precision torque sensor, with torque direction display
Data:Use USB interface and PC communications
-
Range:0.2~10kg/cm2 / 0.4~20kg/cm2
Resolution:0.01~10kg/cm2/0.01kg/cm2
Probe Diameter:1*Φ11.1mm/2*Φ7.9mm
Press Depth:10mm
-
Range:0~14 PH / 1mV, -1000~1000 mV
Resolution:0.01 PH, 1mV
Output:Optional DC 4~20 mA Max Load 1 K
Relay Current:220 VAC Max 3A or 600 VA
-
Test angle:45 degrees
Load:Adjustable, 500g 250g 250g
Test Speed:5mm/sec, adjustable
Travel distance:40mm
-
phased array configuration:phased array dual-probe (one transmit, one receive) inspection mode, and combined inspection using phased array with robes or TOFD probes
inspection modes:phased array, fastening stress, TOFD, and A-scan, which can be switched directly via buttons
data transmission:Wi-Fi wireless network interface, a LAN network interface, and a data expansion interface for convenient data transmission
leak-proof protective:fully enclosed, leak-proof protective design that meets IP66 requirements
-
Model:iSonic-3000HMC
Probe:Single crystal delay single head (15MHz)
Maximum value capture:Display the current thickness value, minimum thickness value and maximum thickness value at the same time
Difference Value mode:Display the difference between the actual thickness and the preset thickness and the thinning percentage
-
Model:iSonic-3000E
Sound velocity range:1000~9990m/s
Accuracy:0.1mm (measurement greater than 100mm); 0.01mm (measurement less than 100mm)
Storage capacity:divided into 6 groups, 100 measurement points in each group, a total of 600 measurement points
-
Application:measure the velocity and acceleration of industrial machinery by observing its vibration
signals transform:Fast Fourier Transform (FFT) to transform time-domain signals into frequency-domain signals for analysis
Measurement range:Displacement: (0.001-10) mm (peak to peak)
Frequency range:Displacement: 10Hz-500Hz
