Payment & Shipping Terms:
|Loading:||From 5N To 100N||Force Precision:||±0.5%|
|Test Mode:||Compression, Tension||Compression:||Plate Diameter 20mm|
universal material tester,
tensile testing machine
Automatic Precision Spring Tensile and Compression Testing Machine with Loading 5N to 100N
Spring Testing Machines is widely used for quick and accurate testing of compression & tension test of springs. The machine uses a high precision Load Cell for measurement of force iqualitrol.
For displacement measurement Mechanical Linear Scale or Digital Vernier Caliper or Rotary Encoder is used. Measuring System is based on latest microcontroller / microprocessor based electronic panels with all facilities.
iST-5 spring testing machine iqualitrol according to the national standard JB/T7796-2017 "tension and compression spring testing machine technical conditions" of the technical requirements.
Iqualitrol iST-5 mainly for a variety of helical spring for tensile and compression test. Under the specified length measurement, the test force of spring, or at a specified force of spring deformation test. Widely used in spring manufacturing company and use the unit.
1. Can automatically measure the spring tension, stress and elastic coefficient;
2. To specify section of 1, 2, 3, Automatic test;
3. The iqualitrol iST-5 human-computer interface dialogue straightforward in English;
4. High efficiency, complete functions, convenient operation;
5. With SPC and mechanical two level limits protection;
6. High speed movement function;
7. By pre-loading and compensation correction to ensure accurate measurements;
8. Load sensor overload protection and emergency stop function;
9. Connect the micro printer.
The spring testing machine is mainly used to measure and analyze the mechanical performance ( tensile force, compressive force, displacement, and stiffness etc) of the springs ( cylinder spring, butterfly spring, tower-shaped spring, closing ring, flat spring, deformed spring and other precision spring).
|Min load value||0.0001N||0.001N||0.001N||0.01N|
|Manual movement value||1mm,0.1mm,0.01mm|
|Testing choice||compression or tension|
|Spring testing option||1, testing load by setting length 2, testing load by setting deformation|
|Power Supply||AC220V, 0.5A|
Contact Person: Mr. Andy DAI